F405 V4 Flight Controller with 4in1 55A/60A ESC Wireless Bluetooth Betaflight INAV for RC FPV Racing Drone DIY

F405 V4 30x30 Flight Controller

MCU: STM32F405

IMU(Gyro): ICM42688P

USB Port Type: Type-C

Barometer: Built-in

OSD Chip: AT7456E chip

BLE Bluetooth: Supported. Used for Flight Controller configuration

DJI Air Unit Connection Way:Two ways supported: 6-pin connector or direct soldering.

Current Sensor Input: Supported. For BLS 55A ESC, please set scale = 400 and Offset = 0.Power Input: 3S - 6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)ESC Signal:M1 - M4 on bottom side and M5-M8 on front side.

Mounting: 30.5 x 30.5mm( 4mm hole diameter)

Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm

Weight: 10.5g

BLS 55A 30x30 4-in-1 ESC
Firmware: BLHeli_S J-H-40

Continuous Current: 55A*4

TVS Protective diode: Yes

ESC Protocol: DSHOT300/600

Power Input: 3-6S LiPo

Mounting: 30.5 x 30.5mm(4mm hole diameter)

Dimension: 45.6(L)* 44(W)* 8mm(H)

Weight: 23.5g

BLS 60A 30x30 4-in-1 ES
Firmware:BLHeli_S J-H-50
Continuous Current:60A * 4
Burst Current:80A(10 sec)
TVS Protective diode:Yes
ESC Protocol:DSHOT300/600
Power Input:3-6S LiPo
Mounting:30.5 x 30.5mm( 4mm hole diameter)
Dimension:45.6(L) * 44(W) *8mm(H)
Weight:23.5g