F405 F4 V3 Flight Controller Stack Betaflight BLS 50A 60A 4 in 1 Brushless ESC for RC FPV Drone
F405 V3 Flight Controller FC:
Flight Control Size:36x36mm
InstallationHole:30.5x30.5mm
Weight:13g
MCU: STM32F405RGT6 168MHz
Gyroscope: MPU6500
BEC: 5V3A/9V3A
Suitable models: 5-10 Inches traversing aircraft/drones, etc
Firmware: BF/INAV (upgradable)
Uart Serial Port:3
Supports Receiver:ELRS/CRSF/SBUS/IBUS PPM/Spketorum DSMX, etc
Power:
Input voltage: 2-6S Lipo
Mounting:
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation.External size 36m × 36mm
BLS 60A 4-in-1 ESC:
Size: 41 * 39 * 5mm
Aperture: 30.5 * 30.5mm
Firmware: BLHELI-S J_H_30_REV16_7
Weight: 15g
Input voltage: LIPO 2-6S
Continuous current:50/60A
Maximum current: 70A (10 seconds)
Processor: EF8BB21
Drive signal support: DShot150-300-600/Multishot/Oneshot/PMW
There are some Q&A from our other buyers,you can refer to them.
1.What are the gyro and barometer used?
Gyroscope: MPU6500,Barometer:BMP280;
2.ls the F405 compatible with Betaflight?
We provide the Betaflight firmware for this F405 flight controller, with OSD configurable via Betaflight drag and drop;
3.Does F405 flight control support GPS fixed points?
It supports inav firmware, and GPS with magnetic compass can achieve fixed-point function.However, since the F405 flight controller only has three serial ports, VTX cannot be used simultaneously in this case;
4.What is the model of F405 flight control stack chip?
The main control chip uses STM32F405 processor with an incredible computing speed of up to 168 MHz, ensuring smoother control, enhanced responsiveness;
5.How about the F405 flight controller's installation hole?
Supports standard 30.5x 30.5mm mounting size, Suitable for 5-10 Inches, traversing aircraft/drones, etc.